New Model MS-2510 Series 25" Hydraulic Shear
The top-of-the-line REC MS-2510 Series of Hydraulic (Alligator) Metal Shears are our largest mouth shears to tackle bulkier and wider scrap metals. The long 25-¼” blade and wide 14” opening make quick work of cutting through bulky scraps like Auto Parts, Tubes, Channels, Signage, Posts and more. The unit’s premium hydraulic cylinder applies over 110 tons of cut force to easily shear a wide variety of scrap metals including Steel, Iron, Copper, Cable and Rebar.
- Foot Pedal Blade Engagement... Automatic single stroke system allows for quick one-off cuts or continuous cycle cutting
- Hydraulic Cylinder powers 25 - 1/4" blade with 110+ tons of cut force to easily cut solid Round Bar up to 2 - 1/4” diameter and Plates up to 25” wide
- Tool-free Adjustable Blade Gate protects blade when not in use and clamps metals for easier, safer cutting
- Powered to Perform… 10-HP Electric Motor (standard), Gas or Diesel-powered Engines and Dual Motor/Engine Combo units are available
- Ideal for Recycling Centers, Scrap yards, Demolition & Construction
SPECIFICATIONS
Model |
MS-2510 |
MS-2510G |
MS-2510D |
MS-2510CG |
MS-2510CD |
Power (HP/cc is rated by the engine mfg) |
10 HP Elec. Motor 230/460/3 |
337cc Honda® GX340 Gas |
442cc Kohler® Diesel |
Combo Elec./Gas |
Combo Elec./Diesel |
Blade Length |
25 - 1/4" |
Shear Height |
32 - 1/8" |
Blade Opening Tip to Tip |
14" |
Cutting Force |
110+ (tons) |
Maximum Cut Speed, Full Open |
11 per minute |
Maximum Cut Speed, 1- 1/2" Open |
63 per minute |
Unit Dimensions (L x W x H) |
72-1/2” x 32-3/4” x 45-1/4” |
72-1/2” x 38-3/4” x 45-1/4” |
Unit Weight DRY (Approximate) |
2,200 lbs. |
2,500 lbs. |
Hydraulic Fluid |
ISO 46 Hyd. Fluid / 50 Gallon Capacity - Unit Ships Dry. Fill Before Use. |
CUT CAPACITY (MILD STEEL)
Angles |
Channels |
Flats |
I-Beams |
Plates |
Bar (Maximum Diameter) |
T Section |
3" x 3/8" |
4" x 2" x 8 lb. |
6" x 3/4" |
4" x 1-3/4" x 5 lb. |
25" x 1/4" |
Round: 2 - 1/4" / Square: 1 3/4" |
3" x 3" x 3/8" |
Crafted with pride in the U.S.A., all MS-2510 Series Hydraulic Metal Shears come with a lifetime guarantee on the main bearing assembly and a one-year parts warranty.
We reserve the right to modify these specifications without notice or liability to previously sold machines.
Recycling Equipment Corporation
831 W 5th St, Lansdale, PA 19446
Phone: 267-218-7200 Fax: 267-218-7215